34
ZQ500 Series User Guide
WLAN Overview
ZQ500 Series printers can be equipped with a Dual Radio op-
tion, meaning a radio that uses both the industry standard 802.11
protocols and Bluetooth 3.0. All radios units are shipped with
the 802.11n radio enabled (default) and the BT radio disabled.
However, users have the option to enable BT if they wish to use
the dual feature. They will have the FCC ID number on the serial
number label on the back of the unit.
• ZQ500 Series Wireless Network Printers with the Zebra
802.11 WLAN radio module can be identified by the text
“Wireless Network Printer” on the serial number label on the back
of the printer.
• These printers allow communication as a node within a wire-
less local area network (WLAN). Methods of establishing commu-
nications to the printer will vary with each application.
More information and LAN configuration utilities are included
in the Zebra Net Bridge™ program (version 2.8 and later). Zebra
Setup Utilities (ZSU) can also be used to configure WLAN com-
munications settings. Both Net Bridge and ZSU may be download-
ed from the Zebra Web site.
In order to obtain the Bluetooth address or the Wireless LAN
address, use a mobile computer to scan the Bluetooth barcode
or the WLAN barcode on the bottom of the printer where shown
in Figure 13.
Figure 13: BT/WLAN Communications
Wireless LAN Barcode
Bluetooth Barcode
To Next Page
Loading...