37
ZQ500 Series User Guide
ZQ500 Series Accessories
Belt Clip
The ZQ510 and ZQ520 printers come with a plastic Belt Clip
(p/n P1063406-040) as a standard feature.
To use:
1. Slide the plastic Belt Clip securely onto your belt (Fig. 15).
2. Insert the hook on the belt clip into the opening of the
printer’s front bumper as shown.
Figure 15: Using the Belt Clip
Hand Strap
The ZQ500 Series Hand Strap accessory (p/n BT16899-1) attach-
es to the front posts of the printer to provide the user with a con-
venient and secure method of carrying the printer. To attach the
Hand Strap to the printer:
1. Attach one swivel snap hook to its corresponding post on
the front of the printer (Fig. 16).
2. Attach the opposite end of the strap to its corresponding
post on the front of the printer where shown.
Figure 16: Using the Hand Strap
Strap Post
Swivel Snap Hook
To Next Page
Loading...