38
ZQ500 Series User Guide
Shoulder Strap
A Shoulder Strap accesory (p/n P1063406-035 ) is also offered
to provide another option for comfortably carrying the ZQ510 and
ZQ520 printers. Similar to the Hand Strap, the shoulder strap at-
taches to the two (2) strap posts on the front of the printer via
rugged swivel snap hooks as shown in Fig. 17. The strap is easily
adjustable up to 56 inches from end to end.
Figure 17: Using the Shoulder Strap
ZEBRA
ZQ520
Strap Post
Swivel Snap Hooks
Adjustable Clip
Soft Case
The ZQ500 Series printers have an environmental Soft Case op-
tion (P1063406-037/-038) that helps protect the printer, while also
allowing the user to carry it from their belt. The paper path is left
open to maintain printing capability and the controls are visible
and accessible while in the case. D-Ring connectors allow for at-
tachment to the shoulder strap option.
To Next Page
Loading...