39
ZQ500 Series User Guide
Figure 18: Using the Exoskeleton
Exoskeleton
In order to provide extreme ruggedness for the ZQ500 Series
printers, they come with an optional hard case, or “ Exoskeleton”
(p/n P1063406-043/-044). This case features a clam shell design
whereby the printer is placed securely inside and the Exoskeleton
is clamped shut. The Exoskeleton comes with a shoulder strap for
easy portability.
All printer ports are inaccessible while the printer is in the hard
case, but the printer control buttons can still be used (Fig. 18).
The user will also be able to mount and charge the printer on the
ZQ500 Series Vehicle Cradle and 4-Bay Power Station while in the
hard case.
Note • Since linerless printers don’t have the reverse tear bar feature
which allows media to be torn both upwards and downwards, it is
recommended that linerless printers not be used with the Exoskeleton.
Linerless media can only be torn down and the Exoskeleton is not resistant
to the adhesive of the linerless media.
Swivel Latch
Control Panel Buttons
To Next Page
Loading...