24
ZQ630 User Guide
Figure 4 • Ethernet Cradle
Height Width Length
66.2 mm (2.6 in.) 200.6 mm (7.89 in.) 219.61 mm (8.64 in.)
Printer Operation with Cradle
• ZQ630 printer will charge when placed in the cradle.
• Docking the printer in the cradle will automatically turn the printer
on to ensure it is available to be managed remotely.
• When the printer detects input power from the cradle, and the
presence of a live Ethernet link, it will automatically connect to the
Ethernet network.
• The 802.11ac radio will be turned o when the Ethernet link is
active. It will turn back on if the Ethernet link is no longer active.
• For printers with a Bluetooth radio, this interface will remain active
while the printer is in the cradle.
• The serial and USB ports will remain active while the printer is in
the cradle.
• The DC input barrel jack connector cannot be used while the
printer is in the cradle. The DC barrel jack should be plugged
directly into the cradle instead.
To Next Page
Loading...