25
ZQ630 User Guide
Note • The printer provides over voltage protection such that no
damage occurs when voltages from 0-36V are applied at the DC
Power jack. Upon application of voltage greater than 36V, the DC line
fuse will permanently open to reduce re hazard. The battery is only
charged when 12VDC is applied using the Zebra AC adapter.
1-Slot Battery Charger
(p/n SAC-MPP-1BCHGUS1-01SA with US Type-A Line Cord)
Use Case: Home Oce/Small Business
The 1-Slot Battery Charger provides the user with a single, spare
battery charging solution. Similar to the 3-Slot Battery Charger, the
single charger will charge a 4-cell battery within six (6) hours.
Figure 5 • 1-Slot Battery Charger
LED Indicator
To Next Page
Loading...