Zebra ZQ630 - Operator Controls

30
ZQ630 User Guide
Operator Controls
The ZQ630 printer comes equipped with a keypad control panel
and a color LCD graphical user interface. The standard control
panel is illustrated in Figure 10. The LCD interface allows easy
display and selection of many printer functions as detailed on
following pages.
Standard Control Panel
The standard control panel has multiple control buttons and two
multipurpose indicators.
• The Power Button (Fig. 10) turns the printer on and o󰀨. It also
puts the printer in Sleep Mode and wakes it from sleep.
• The Media Feed Button (Fig. 10) advances a length of media
which is determined by the type of media being used. Label
media will be advanced to the next gap or bar sense marker.
Journal (plain) media will be advanced by a length determined by
the printer’s software.
• Four Way Navigation Buttons (Fig. 12) allow the user to scroll
between functions on the LCD user space. (The Navigation
Buttons do not apply to the Status Bar and Navigation Bar.)
• Enter Button allows the user to select the desired function
highlighted on the LCD interface and is indicated by the word
“OK”.
• Two software dened function keys (Fig. 12) allow the user to
select a function listed on the navigation bar
Figure 10 • Control Panel
Power Button
Press to turn unit on. There will be
approximately a 20 second boot up time.
Press for 3 sec. to turn unit o󰀨.
Feed Button
Press to advance a blank label or
a software-determined length of
journal media.