31
ZQ630 User Guide
Normal Boot-up LED Behavior
1. Press Power (on/o) button to turn the printer on.
2. When Power button is released, the power ring will blink as the
printer boots up.
3. When the boot-up sequence is complete, the power ring will
stop blinking and remain steadily lit. The color of the power ring
depends on the charge status.
Sleep Mode LED Behavior
1. Pressing the Power Button for less than three (3) seconds will
put the printer in sleep mode.
2. During Sleep Mode, the Power LED will slowly pulse either
Green, Amber or Red depending upon whether or not the
printer is charging successfully.
Shutdown Behavior
1. Press the Power Button for approximately three (3) seconds to
turn the printer o.
2. The “Shutting Down” alert message will appear on the LCD
prior to the printer shutting down.
Figure 11 • Printer Shutdown
To Next Page
Loading...