Pg. 18 Card Jam MAG
Pg.19 Options Card Jam
Pg.20 Service Center Card Jam MAG
Pg.21 Service Center Options Card Jam
Pg. 22 Reference Page Part 1
Pg. 23 Reference Page Part 2
Reference Page Part 2
2.2 Card hops the card path under the smart card encoder. Tends
to hop the card path from flipper deck being out of calibration.
2.0 Card Jammed under Smart Card Module 2.1 Remove Plastic MAG Cover
2.3 Mag Belt In Options Module
With Possible Loose Tension
2.4 Screws That Need To Be
Tightened to Secure MAG Motor
And Tigheten Loose Belt
23
To Next Page
Loading...
