Need help?Do you have a question about the Zebra ZXP 7 series and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Connectivity | USB 2.0, Ethernet |
| Memory | 64 MB standard |
| Print Technology | Dye-sublimation thermal transfer |
| Card Capacity | 200 cards input hopper, 100 cards output hopper |
| Card Sizes | CR-80 ISO 7810, 2.12" (54 mm) x 3.38" (86 mm) |
| Power Requirements | 100-240 VAC, 50-60 Hz |
Details the physical parts of the Zebra ZXP Series 7 printer.
Explains manual symbols and lists recommended printer consumables.
Provides an overview of the printer installation and setup process.
Step-by-step guide for safely removing the printer from its packaging.
Instructions for properly loading cards into the printer's feeder.
Procedure for installing the card feeder and output hopper components.
Guide for inserting the dual and manual feed cleaning cartridges.
Process for installing a new print ribbon into the printer.
Instructions for installing laminate rolls into the printer.
Steps for making electrical and data connections to the printer.
Guide for installing the printer driver via USB or Ethernet connection.
Overview of basic printer operations and printing process.
Method for printing a test card to verify printer functionality.
Procedure for feeding single cards manually into the printer.
Explanation of the printer's front panel display and buttons.
Overview of configurable settings and adjustments available.
Accessing and configuring printer properties via Windows.
Customizing print job settings and options through the driver interface.
Overview of the advanced utility for printer management.
Methods to launch the toolbox and view printer status.
Monitoring printer hardware sensors and media levels.
Managing settings, job logs, and performing maintenance.
Configuring magnetic and smart card features.
Setting up security roles and using the print diagnostic tool.
Importance and recommended schedule for printer maintenance.
Procedures for cleaning the printer's internal card paths.
Procedures for cleaning laminator components like rollers and oven.
Details on dual and manual feed cleaning cartridges.
Guide to identifying and resolving printer issues.
List of common error codes, causes, and solutions.
Using test cards for diagnostics and troubleshooting network connectivity.
Details on core and additional printer capabilities.
Information on encoding, software, and printing throughput.
Operating conditions, safety notifications, and regulatory compliance.
Explanation of printer part numbers and available configurations.
Table detailing different printer model configurations.
Overview of methods to connect the printer to an Ethernet network.
Step-by-step guide for installing a network printer using Windows.
Configuration steps for distributing print jobs across multiple printers.
Overview of accessing printer settings via a web interface.
Steps to access the printer's web page using a browser.
Information on magnetic card encoder operation and types.
Configuring magnetic encoding via the printer driver settings.
Testing the magnetic encoder and understanding ISO, AAMVA formats.
Using commands for pass-through magnetic encoding.
Overview of additional operations for printers with smart card capabilities.
Details on using contact smart cards with the printer.
Details on using contactless smart cards with the printer.
Global contact details for technical support and repair services.
Contact information for technical support and repair by region.
To Next Page
