5: ZXP Series Toolbox
Information
P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 95
Information
Printer
Printer information cannot be edited or changed by the user; however, this information may be
useful for Zebra trained and certified personnel in diagnosing or evaluating printer status.
•Status shows the current operational state of the Printer; e.g., Ready, Offline, etc.
• Firmware and Driver lists the versions of the Firmware, Laminator, MAB, and
Laminator MAB and the version of the Driver.
• Other shows the Interface, the Laminator serial number, the Printer serial number, and
Available Memory.
• Options shows the options installed -- Magnetic encoding, Contact smartcard, Contactless
smartcard, and Laminator type.
• Network Configuration information includes the IP address, Gateway, Subnet mask, and
MAC address.
• OCP shows the Language displayed in the Operator Control Panel and the LCD contrast
level selected.
• Odometer shows the number of Cards printed and the number of Printhead lines printed.
To Next Page
Loading...
