Need help?Do you have a question about the Zebra ZXP 3 series and is the answer not in the manual?
General| Resolution | 300 dpi |
|---|---|
| Card Thickness | 10-40 mil |
| Print Technology | Dye-sublimation thermal transfer |
| Card Capacity | 100 cards input, 45 cards output |
| Card Sizes | CR-80 |
| Connectivity | USB |
| Memory | 32 MB |
| Optional Features | Magnetic stripe encoder |
| Operating System Compatibility | Windows 7, 8, 10 |
| Dimensions | 9.3" x 7.9" x 14.5" (236 mm x 200 mm x 368 mm) |
Lists available part numbers and configurations for the ZXP Series 3 printer.
Identifies and describes the printer's external features, controls, and indicator lights.
Details the various ports and connectors located on the rear of the printer.
Explains the functions and messages displayed on the printer's LCD panel.
Provides step-by-step instructions for safely unpacking the ZXP Series 3 card printer.
Guides through the physical setup and connection process for the printer.
Details how to position and prepare the printer for operation.
Explains how to connect the printer to an electrical power source safely.
Details how to connect the printer to a computer via USB or Ethernet.
Describes how to access and view the printer's current configuration and status.
Step-by-step guide for installing the necessary Windows printer driver software.
Outlines the initial requirements and steps before installing the printer driver.
Detailed instructions for installing the printer driver for USB connections.
Detailed instructions for installing the printer driver for Ethernet connections.
Provides an overview of the internal components of the ZXP Series 3 card printer.
Step-by-step guide for inserting and replacing the ribbon cartridge.
Instructions for properly loading blank cards into the printer's card feeder.
Explains how to install and use the card output hopper.
Instructions on how to print a test card to verify printer functionality.
Describes the general workflow for operating the card printer.
Guides on how to design and create a sample card for testing.
Instructions on how to print the created sample card.
Introduces the section on printer settings and adjustments available via the driver.
Overview of the printer properties window and its main tabs for configuration.
Explains the General tab for viewing printer information and settings.
Details how to configure printer sharing over a network.
Describes how to configure printer port settings, including pooling.
Explains advanced printer settings related to job handling and spooling.
Details how to adjust color profiles and settings for print output.
Explains how to manage user permissions and access to the printer.
Accesses detailed printer settings like firmware, encoder, and device info.
Customization options for print layout, color, ribbon, head settings, and printing mode.
Provides guidelines and warnings for maintaining the printer's cleanliness.
Indicates when it is necessary to clean the printer.
Step-by-step instructions for performing a system cleaning cycle.
Detailed instructions for cleaning the printer's printhead.
Introduces the troubleshooting section and its approach to problem resolution.
Provides methods for diagnosing and resolving common printer issues.
Lists and explains error messages and warnings displayed on the LCD panel.
Addresses common problems related to print quality and their solutions.
Discusses and provides solutions for small spots appearing on printed cards.
Explains causes and solutions for horizontal white lines on printed cards.
Addresses issues leading to pale or inconsistent print results.
Discusses causes and solutions for blurry printed images on cards.
Provides steps to resolve situations where the printer is not printing at all.
Details the general, communication, and printing specifications of the ZXP Series 3.
Lists the specifications for various types of ribbon cartridges.
Information on compatible card types, sizes, and materials.
Details the available magnetic and smart card encoding options.
Lists optional features like CardSense and extended warranty programs.
Information on supported barcode symbologies.
Details security features like Kensington lock and print engine compartment.
Electrical specifications including power input and output.
Physical dimensions of the printer unit.
Operating and storage conditions for the printer.
Lists various agency approvals and certifications for the printer.
Provides dimensional specifications for ISO standard cards used with the printer.
Introduces the section covering network configurations and operations.
Explains different methods for setting up the printer on a network.
Details how to share the printer with other computers on the network.
Describes using an external print server for network connectivity.
Explains the concept of an internal print server for networking.
Step-by-step guide for adding and configuring a network printer.
Instructions on how to set up printer pooling for load balancing.
Introduces the optional magnetic encoder and its operations.
Details the driver settings for configuring the magnetic encoder.
Specific dialog box for setting up magnetic encoding parameters.
Advanced configuration options for magnetic encoding tracks and parity.
Proper orientation for loading magnetic stripe cards into the feeder.
How to clean the magnetic encoder using standard cleaning procedures.
Explains different magnetic encoding standards like ISO and AAMVA.
Introduces the smart card options available for the printer.
Instructions for installing and using the output hopper.
Information on using contact smart cards with the printer.
Proper orientation for loading contact smart cards.
Guidelines for printing on contact smart cards.
Information on using contactless smart cards with the printer.
Details on loading contactless smart cards, noting orientation is not a factor.
Guidelines for printing on contactless smart cards.
Information on the smart card contact station and its interface.
Details the DB-9 connector for the smart card contact station.
Introduces the optional CardSense Single Card Feed Kit.
Step-by-step guide for installing the CardSense Single Card Feed Kit.
Configuration steps to enable the single card feed mode in the driver.
Instructions on how to print a single card using the CardSense feature.
Contact information for technical support and repair services in North America and Latin America.
Contact details for technical support and repair services in Europe, Middle East, and Africa.
Contact information for technical support and repair services in the Asia Pacific region.
To Next Page
