Need help?Do you have a question about the Zebra ZXP Series and is the answer not in the manual?
General| Print Technology | Dye Sublimation Thermal Transfer |
|---|---|
| Resolution | 300 dpi |
| Connectivity | Ethernet |
| Supported Card Sizes | CR80 |
| Encoding Options | Magnetic stripe (HiCo, LoCo), Smart card (contact and contactless) |
| Operating System Compatibility | Windows |
Configure the type of card to be printed for optimal quality.
Set the printer for single or double-sided card printing.
Choose the appropriate ribbon combination for printing needs.
Print a test card to verify printer settings and quality.
Overview of the Zebra ZXP Series 9 Card Printer.
Identify the main parts of the printer and optional laminator.
Explanation of icons used throughout the user guide.
Information on recommended genuine Zebra supplies.
Provides general guidance for printer installation and setup.
Steps for safely unpacking the ZXP Series 9 Card Printer.
Steps for unpacking the printer with an attached laminator.
Instructions on how to load cards into the printer's input hopper.
Guide on attaching the input and output card hoppers.
Steps for installing the printer drivers and software.
Procedure for installing the printer's cleaning cartridge.
Procedure for installing the printer's cleaning roller.
Instructions on how to load the transfer film.
Instructions on how to load the print ribbon.
Guide for replacing the laminate rolls in the laminator.
Procedure for packing the printer for shipping.
Procedure for packing the printer with a laminator for shipping.
Overview of operating the ZXP Series 9 Card Printer.
Configuring printer settings via the Printing Preferences control panel.
Selecting the correct card type for optimal print quality.
Choosing and configuring the appropriate print ribbon.
How to print a test card for quality verification.
Using the manual feed slot for single card printing.
Overview and navigation of the printer's control panel.
Understanding operational, warning, and error messages.
Troubleshooting common errors displayed on the Operator Control Panel.
Procedures for clearing card jams in the printer and laminator.
Using built-in test cards for diagnostics and quality checks.
Diagnosing and resolving print and transfer quality problems.
Interpreting Ethernet port link and speed indicator lights.
Methods for connecting the printer to an Ethernet network.
Steps to add the printer to a Windows 7 network.
Information and setup for connecting the printer wirelessly.
Configuring wireless settings using a web browser.
Configuring wireless settings using the operator control panel.
Setting up printer pooling for load balancing.
Supported Windows configurations for sharing the printer.
Guide to setting up custom card specifications.
Step-by-step process for defining custom card types.
Fine-tuning parameters for transfer temperature and speed.
Overview of the magnetic card encoding functionality.
Selecting the correct ribbon for magnetic stripe encoding.
Configuring magnetic encoder settings in the printer driver.
Correct orientation for loading cards with magnetic stripes.
Configuring ISO, AAMVA, Custom, or Binary encoding types.
Information on the smart card encoding capabilities.
Configuring smart card types in the printer driver.
Correct orientation for loading contact smart cards.
Details on connecting to external smart card programmers.
To Next Page