1 ZXP Series 9 Card Printer User Guide P1086707-002
1
Introduction
Description
This manual contains installation, operation, maintenance, troubleshooting, and networking
information for the Zebra ZXP Series 9 Card Printer; and describes single- and double-sided
printers, and double-sided printers with either a single- or double-sided laminator; and is intended to
be used by an operator, as well as an experienced IT person.
The Zebra ZXP Series 9 Card Printer uses reverse transfer printing technology to create photo-
quality and over-the-edge images on plastic identication cards. Zebra’s reverse transfer printers
provide fast throughput and a range of encoding options for a variety of markets and applications.
The single-sided laminator applies a laminating lm on the top surface of the printed card for added
security; the double-sided laminator applies laminating lm on both the top and bottom surfaces of
the card.
References in this document to “the laminator” apply to either a single- or double-sided laminator.
To Next Page
Loading...