P1086707-002 ZXP Series 9 Card Printer User Guide 39
Operation
Card Type Selection
Card Type Selection
The Printing Preferences Control Panel enables you to specify the card type in use. Based on your
selection, the printer makes adjustments for optimum print quality.
Step 1. Open the Printing Preferences Control Panel (“Printing Preferences” on page 38).
Step 2. From the Card Setup tab, click the Card type in use drop-down menu and select the
appropriate card type (circled below). Supported card types are:
y PVC, Standard
y PVC, Mag Stripe
y PVC, Contactless SC
y PVC, Contact SC
y Composite, Standard
y Composite, Mag Stripe
If your card type is not listed in the drop-down menu, select Custom and ll out the
Card Specications pop-up screen (see “Setting Custom Card Specications” on
page 101 for details).
For help setting the custom card specications for your card type, contact the Zebra
Card Testing Service at 866-569-9086 (Toll Free), or cardtestingservice@zebra.com.
Step 3. Click Apply and then click OK.
To Next Page
Loading...