90 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
4: Printer Settings and Adjustments
Printing Preferences
Color (YMC) Optimization Tab
To access the Color (YMC) Optimization Tab, select Start > Devices and Printers. Right
click on the Zebra ZXP Series 7 Card Printer listing, and select Printing preferences >
Color (YMC) Optimization. Not available for monochrome/KdO/KrO ribbons.
These color adjustments modify only how the pictures print. These adjustments do not
affect the image files. (That type of adjustment would be made in an image processing
application program.)
• Full color printing adjustments (-25 to +25 range) include Brightness, Contrast, Gamma,
Saturation, Red, Green, and Blue. Adjustments are reflected in the preview image.
- Sharpening filter options are None, Low, Normal (default), and High. Adjustments
are not reflected in the preview image. By default, the image file is automatically
sharpened; i.e., edges are enhanced within the image. If sharpening has already been
done, this function can be turned off (None). The Low and High options are available
if additional sharpening adjustment is required.
- Preheat adjustment ranges from -50 to 50, default = 0. Increasing the preheat value
will darken up edges of fonts, fine lines, and color edges that are against a white or
very near white background. In some cases, increasing the preheat value too much
can cause the white or near white images to print with as light color cast. Increasing
the preheat might also improve color-to-color mis-registration that may occur for
certain images.
To Next Page
Loading...
