Zebra ZXP 7 series User Manual

6 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
2: Installation and Setup
Unpacking the Printer
Unpacking the Printer
Printer without a Laminator
Step 1. Inspect the shipping container to ensure that no damage has occurred during
shipment. If any damage is apparent, file a claim with the shipper.
Step 2. Open the shipping container.
Step 3. Remove the packing material and accessories.
Step 4. Make sure the following items are included with the Printer:
If any items are missing, please contact your supplier.
Important • Save all the packing material and the shipping carton in case the Printer needs to
be moved or shipped. If the original material is lost or damaged, a replacement Shipping Kit
can be ordered from Zebra.
Quick Start Guide CD-ROM with InstallWizard Dual Cleaning Cartridge
Manual Feed
Cleaning Cassette
USB Cable Power Cable
Feeder Cartridge Output Hopper
USB

Zebra ZXP 7 series Specifications

General

Print Resolution	300 dpi
Connectivity	USB 2.0, Ethernet
Memory	64 MB standard
Print Technology	Dye-sublimation thermal transfer
Card Capacity	200 cards input hopper, 100 cards output hopper
Card Sizes	CR-80 ISO 7810, 2.12" (54 mm) x 3.38" (86 mm)
Power Requirements	100-240 VAC, 50-60 Hz