Zebra ZXP 7 series - Cleaning Cartridges

To Next Page

To Previous Page

6: Cleaning

Cleaning the Laminator

P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 125

Step 8. For dual-sided laminators only: Locate the bottom roller (circled below) for the

lower cassette.

Step 9. Prepare a second Cleaning Swab.

Step 10. Locate the bottom roller (circled below) for the lower cassette.

Step 11. When ready, press Bottom.

Step 12. Clean the bottom media roller by moving the swab tip side-to-side until the roller

stops turning. Only use moderate pressure.

Step 13. Press Exit to conclude the laminator rollers cleaning process.

Step 14. The OCP will return to the Clean Printer Menu.

Step 15. Install the laminate (top and bottom spools), and close the covers.

Other manuals for Zebra ZXP 7 series