Zebra ZXP 7 series - Page 130

126 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
6: Cleaning
Cleaning the Laminator
Clean the Laminator Oven (Heater Rollers)
Step 1. From the Clean Printer Menu, select CLEAN LAM OVEN; and follow the
OCP instructions.
Step 2. Wait until the oven temperature falls below 60
o
C.
Step 3. Open the laminator covers.
Step 4. Remove the four thumb screws (circled below) holding the Heater Assembly
in place.
Step 5. Slide the Heater Assembly out of the Laminator (arrow below).
Step 6. When ready, press Next.
Caution • For the next step, you may have to wait until the Heater Assembly can be
handled comfortably.