Zebra ZXP 7 series - Page 128

124 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
6: Cleaning
Cleaning the Laminator
Clean the Laminator Media Rollers
Step 1. From the Clean Printer Menu, select CLEAN LAM ROLLERS to run the Laminator
Media Roller Cleaning Routine; and follow the OCP instructions.
Step 2. Wait until the oven temperature falls below 60
o
C.
Step 3. Open the laminator covers, remove the laminate (top and bottom cassettes), and
leave both covers open.
Step 4. Prepare a Cleaning Swab for use.
Step 5. Locate the top roller (circled below) for the upper cassette.
Step 6. When ready, press Next; and then press Top.
Step 7. Clean the top media roller by moving the swab tip side-to-side until roller stops
turning. Only use moderate pressure.