100 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
5: ZXP Series Toolbox
Configuration
• Log File Contents - The Log File Contents group selects the data to be logged in the file
you specified above. The data will be logged in the order displayed on the screen, each
field being separated by the character specified in the Logfile Definition, Separator.
Log File Contents selections include:
- Time: Logs the time a which the card was sent to the printer in the HH:MM:SS
format. The 24-hour clock is used, so 13:00:00 = 1:00 pm, and 05:00:00 = 5:00 am.
- Date: Logs the date the card was sent to the printer in the YY:MM:DD format.
- Printer serial number: Logs the serial number of the printer that printed the card.
- Static text: Adds to the record text in the box at right, 16 characters maximum.
- IP address: Logs the IP address of the PC that sent the card to the printer.
- Magnetic Track 1, 2, 3 Data: Logs the data sent to the printer to be encoded on
the card’s magnetic stripe.
- Application will send data with “
~
L=xxx” TextOut: Allows third-party
applications to send data to be logged in much the same way as they would send
magnetic data.
- Spooler job number: Logs the number which the card print job was assigned in the
Windows print spooler.
- User name: Logs the username of the person submitting the card print job.
- ZML Job ID: Logs the UUID; or, in a Windows environment, the GUID.
The Save Job Log Settings button saves the Job Log settings.
The Save Printer Log Files button creates the following XML Log Files:
- GetLogCleanHistory.xml
- GetLogErrors.xml
- GetLogEventHistory.xml
- GetLogServiceHistory.xml
To Next Page
Loading...
