Zebra ZXP 7 series - Page 114

110 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
5: ZXP Series Toolbox
Technology
• Encode/Read Data
Coercivity: Select either High or Low.
Hex checkbox: This is used to encode mag data in hex instead of ASCII text.
Track selection:
- For reading: Click the checkboxes to select Track 1, Track 2, and/or Track 3; click the
Read button, and validate the data read.
- For encoding: Click the checkboxes to select Track 1, Track 2, and/or Track 3; enter
the data to be written; and click the Encode button.
The Printing Preferences button takes you to Printing Preferences used to set selected driver
configuration parameters; see Printing Preferences on page 76 for details.
Note • Access to this feature is controlled via Advanced Security > Security Roles.