Zebra ZXP 7 series - Page 116

112 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
5: ZXP Series Toolbox
Technology
• Card Types (continued):
- Input Data includes address, length, input, and PIN.
• Writing Data: Set the address, set the length, enter data in Input field, and click
the Write button.
• Reading Data: After writing data (above), click the Read button. “Read
successful” and the value read from the smart card will be displayed in the
Messages section.
• Click the Set PIN button to set the security code for the card.
• Click the Write Raw Data button to write “raw data” to a card.
-The Get ATR button returns the ATR (Answer To Reset) result from the card reader.
This is useful for identifying the type of smart card inserted into the printer.
-The Eject Card button ejects the card.
- Click the Show output as hex format checkbox to show the output in hex format
in Messages.