52 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-001
3: Operation
Manual Card Feed
5. Hold the cards by the edges only. Do not touch the printing surface as this can reduce
print quality. The surface of the cards must remain clean and dust free.
6. Insert a card into the Manual Feed Slot in the correct orientation:
• For Standard Cards, any orientation is acceptable.
• For Magnetic Cards, the stripe is
DOWN and to the REAR.
• For Contact Smart Cards, the chip is
UP and to the LEFT.
7. Continue to insert the card until you feel a slight resistance when the printer “grabs” it.
8. The card will automatically be drawn into the printer when the print job is sent.
To Next Page
Loading...
