• Press the PREV button to move up the menu list
• Press the
NEXT button to move down the menu list
• Press the
EXIT button to return to the Operating Mode Display
PRINTER INFO
NETWORK INFO
RIBBON INFO
PRINTHEAD USAGE
CONFIGURATION INFO
Displays MCB FW Ver, MAB FW Ver, MSN (Machine Serial Number),
PH S/N (Printhead Serial Number).
Displays DHCP, IP, Mask, GW, and MAC.
Displays Type, # Images, and % Remaining.
Displays Card Count and Printhead Lines.
Lists RAM, Single or Dual Sided, and Options Installed: Mag, Encoder, Laminator.
INFO Button
(Operating Mode Display)
Info Menu
PREV NEXT EXIT
* Only applies to Printers with a Laminator.
REJECT BIN
Displays number of cards in Reject Bin (Card Count = n).
CLEANING DUE
CAL LUT INFO
Displays # Cards since last cleaning of Card Path, Feeder Path, Printhead, Laminator Path*, and
Laminator Oven*.
Displays info for LUT 1 (Look-Up Table 1), LUT 2 (Look-Up Table 2), and Color Collaboration.
LAMINATOR INFO *
Displays LCB, MAB, Serial Number, Top installed (yes/no), Bottom installed (yes/no).
TOP LAMINATE INFO *
Displays P/N, Type, # Images, and % Remaining.
BOTTOM LAMINATE INFO *
Displays P/N, Type, # Images, and % Remaining.
LAMINATOR TEMPERATURE *
Displays Settings: Top and Bottom temperature; and Current: Top and Bottom temperature.
LAMINATOR ODOMETER *
Unit on (# days), Top on (# days), Bottom on (# days), # Laminated, # Processed.
To Next Page
Loading...
