4: Printer Settings and Adjustments
Printing Preferences
P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 77
Card Setup Tab
To access the Card Setup Tab, select Start > Devices and Printers. Right click on the Zebra
ZXP Series 7 Card Printer listing, and select Printing preferences > Card Setup.
• Card options allows the user to select the Card Source and Card Destination.
-Card source
• Manual feed slot
• Feeder cartridge -- default
• Already in printer (for applications that use this feature)
- Card destination
• Output hopper -- default
•Reject bin
• Leave in printer (for applications that use this feature)
-Image size
• Default Size (1006 * 640 pixels): Note that this setting should always been
used unless you are printing images that were specifically designed for other
Zebra printer models.
• CR-80 (952 * 578 pixels): For Zebra P640i Card Printer compatibility.
• Bordered (968 * 610 pixels): For Zebra P640i Card Printer compatibility.
To Next Page
Loading...
