4: Printer Settings and Adjustments
Printing Preferences
P1036101-001 Zebra ZXP Series 7 Card Printer User’s Manual 85
• Extract UV from job image
Similar to K extraction, this mode allows you to print a selected portion of the YMC
image using the UV panel. Options include Defined areas, Except defined areas, and
Full card. These options are selected via their associated radio buttons.
Defined areas allows you to specify what areas will be also printed with YMC and UV.
Undefined areas will print YMC with UV in all areas except those that are indicated. Full
card will print the entire image with YMC and UV.
- Area manager: This section is enabled when either Defined areas or Undefined areas
is selected.
•The Orientation selection sets the image orientation to either Portrait or
Landscape.
•The Units selection sets the units to either inches or mm (millimeters). The X
dimension, X offset, Y dimension, and Y offset reflect these units.
To create a zone: Select the rectangle icon , click on an area of the image to establish
the first corner of the zone, drag the cursor until the zone is the desired size and shape,
then release the mouse button. Note that multiple zones can be defined.
To select, move, or resize a zone: Select the arrow icon , click on a zone to select it,
then drag it to move it or drag on the edges to resize it.
To delete a zone: Select the rectangle icon with an “X” through it , then click on the
zone that you want to delete.
To Next Page
Loading...
