ZXP Series Toolbox
Advanced Security
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 103
To change the Password:
1. Enter your password in the Old password field.
2. Enter the new password in the New password and the Confirm password fields.
3. Click on the Apply button.
Advanced Password:
This password provides access to service-related tests and adjustments via the Advanced
Setting button; see Firmware and Settings on page 93. Use is limited to Zebra-authorized
service personnel.
Last Print job option:
-The Erase job data following successful card printing option erases the print job after
successful card printing.
-The Retain job data after card printing option allows the print job to remain in
memory for multiple prints via the OCP.
The Save button saves your selection.
To Next Page
Loading...