P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 139
Appendix B
Setting Custom Card
Specifications
B.1 Introduction
This document is to be used for setting the specifications for cards not listed in the Card type
in use dropdown menu; circled below. Setting the specifications for a non-listed card type is a
three-step process that uses the Card Setup Tab:
Note • To access the Card Setup Tab, select Start > Printers and Faxes. Right click on the
Zebra ZXP Series 8 Card Printer listing; and select Printing Preferences > Card Setup.
To Next Page
Loading...