Zebra ZXP 8 Series - Page 187

Network Operations
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 183
Step 6. Observe the Select a Printer Port window.
Step 7. Click on the Create a new port radio button.
Step 8. From the dropdown menu, select Standard TCP/IP Port.
Step 9. Click on the Next button, and observe the Add Standard TCP/IP Port
Wizard window.
Step 10. Be sure that your printer is turned on and the network is connected and configured.
Step 11. Click on the Next button.