Installation and Setup
Loading the Transfer Film
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 15
Loading the Transfer Film
The ZXP Series 8 printer is designed to work only with Zebra True Colours™ i Series™
Transfer Film for near photographic print resolution and over-the-edge printing.
Step 1. Locate the transfer film supply spindles and the transfer film take-up spindles. Note
that the Flanges and Spindles are color coded (white-to-white, green-to-green).
Supply Spool
GREEN
Take-up Spool
WHITE
Take-up Spindle
GRAY
Supply Spindle
GRAY
Take-up Spindle
WHITE
Supply Spindle
GREEN
Flange
Flange
To Next Page
Loading...