Zebra ZXP 8 Series - Page 92

88 Zebra ZXP Series 8 Card Printer with Laminator P1013372-001 Rev. A
ZXP Series Toolbox
Information
Laminator
This information cannot be edited or changed by the user; however, this information may be
useful for Zebra trained and certified personnel in diagnosing or evaluating laminator status.
• Status information includes Warnings and Faults; Communications, AC Power, and
Heated Rollers; Top (Surface and Ambient) and Bottom (Surface and Ambient)
temperatures; and Line Voltage and Line Frequency.
• Firmware lists the version of the Firmware.
• Sensors details the state of each laminator sensor.
• Odometer shows Total up time, Heater on time, the number of Cards processed, and the
number of Cards laminated.