Zebra ZXP Series 3 - Electrical Specifications; Environmental Specifications

88 Zebra ZXP Series 3 Card Printer User’s Manual P1058486-002
7: Technical Specifications
Printer Specifications
Electrical Specifications
• Auto-switching single-phase AC power
• Operating range: 90-132VAC and 190-264VAC RMS.
• Frequency range: 47-63 Hz.
• Power requirement is 100W max continuous and 607W peak (for 450 μ
sec)
output power
• FCC Class A
Environmental Specifications
• Operating Temperature: 60º F to 86º F (15º C to/30º C)
• Storage Temperature: 23º F to 158º F (-5º C to 70º C)
• Operating Humidity: 20% to 65% non-condensing
• Storage Humidity: 20% to 70% non-condensing
• Media Storage:
- Temperature: 41F to 77F (5C to 30C)
- Humidity: 35% to 65% non-condensing
- Store in dark location
Agency Approvals
Zebra ZXP Series 3 Card Printer complies with following applicable directives and
standards for the ITE: Residential, Commercial & Light Industry environments
• For US/Canada/Mexico/Australia&NZ
- FCC Class A, cfr47, Part 15 Subpart J
- FCC 15.257 2008, Part 15 Subpart C
- Canadian STD RSS-210
- NOM-ETL (Mexico)
- IEC 60950-1:2005+A1:2009 Safety Standard (TUV & NRTL)
- C-Tick (Australia) Electromagnetic Radiation Standard
• For Europe:
- Applicable Directives and Supporting Standards:
2004/108/EC EMC Directive, EN55022:2010 Class A,
EN55024:2010, EN61000-3-2:2006+A2:2009,
EN61000-3-3:2008, 2006/95/EC LVD Directive,
EN60950-1:2006+A11:2009+A1:2010+A12:2011, CB Scheme
- RFID Enabled
Applicable Directives and Supporting Standards:
99/5/EC R&TTE Directive, EN 301 489-3 V1.4.1,
EN 300 330 V1.5.1