4: Printer Settings and Adjustments
Printing Preferences
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 93
- Intensity adjustments for Yellow, Magenta, and Cyan range from -10 to +10.
By default, the Maintain YMC ratio checkbox is selected; so all three sliders move at
the same time. With the checkbox unselected, the sliders move independently. Note
that by moving the sliders independently the tones of the image will shift.
Intensity can be used to lighten or darken the entire printed color image. It can be used
to eliminate ribbon wrinkling or ribbon sticking/ripping in hot or humid
environmental conditions.
Note that the Intensity setting has no effect on the preview image but is applied to the
image during the printing process. These adjustments remain set until changed.
Click the Advanced button to access to the Advanced Color (YMC) Optimization pop-
up window; see next page.
To Next Page
Loading...