5: ZXP Series Toolbox
Configuration
P1036101-002 Zebra ZXP Series 7 Card Printer User’s Manual 111
Wireless Settings
The Wireless Settings screen allows you to connect a printer to a wireless network, or change
the printer or network settings after you have installed the printer; see Wireless Reference
Manual P1035089-003 for details.
There are two approaches that can be used to configure the printer's wireless settings:
• If all the necessary information is known (SSID, BSSID, Channel, Security, Encryption
and Key), enter these parameters directly into the Wireless Configuration.
• The alternate approach is to request that the printer scan for wireless access points and
select one. This automatically fills in most of the Wireless Configuration parameters.
Note • Access to this feature is controlled via Advanced Security > Security Roles.
To Next Page
Loading...