120 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002
5: ZXP Series Toolbox
Technolo g y
Technology
Magnetic Encoding
The Magnetic Encoding screen allows the user to set various magnetic encoding options. For
more information on magnetic encoding, refer to Appendix D.
• Settings
Before using this screen, set the following magnetic encoding properties:
1. Select the operation checkboxes as required:
• Disable magnetic encoding.
• Magnetic encoder verification ON.
2. Select the magnetic encoding type. Encoding types supported are ISO, AAMVA,
CUSTOM, BINARY.
Track 1, Track 2 and Track 3 settings will be enabled only for
Custom mag encoding format.
3. Select Coercivity: High or Low based on card type.
Note • Access to this feature is controlled via Advanced Security > Security Roles.
To Next Page
Loading...