136 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002
6: Cleaning
Cleaning the Laminator
Clean the Laminator Media Rollers
Step 1. From the Clean Printer Menu, select CLEAN LAM ROLLERS to run the Laminator
Media Roller Cleaning Routine; and follow the OCP instructions.
Step 2. Open the laminator covers, remove the laminate (top and bottom cassettes), and
leave both covers open.
Step 3. Prepare a Cleaning Swab for use.
Step 4. Locate the top roller (circled below) for the upper cassette.
Step 5. When ready, press Next; and press Top.
Step 6. Clean the top media roller by pressing the swam against the roller and moving the
swab tip side-to-side until roller stops turning. Only use moderate pressure.
NOTE • Do not use previously used cleaning cards. To order ZXP Series 7 cleaning supplies,
see
http://www.zebra.com/supplies for details.
To Next Page
Loading...