Zebra ZXP Series - Page 106

94 ZXP Series 9 Card Printer User Guide P1086707-002
Network Operations
Wi-Fi Connectivity
Setup via Browser Console
This section explains how to connect your ZXP Series 9 Printer to a wireless network via your Web
Browser.
Minimum Requirements
y Wired Ethernet environment with a DHCP Server (used to set up wireless parameters).
y Wireless Network environment to include:
 Wireless Router or Access Point enabled for 2.4 GHz operation
 Access point Passphrase or Password
 SSID (network name)
y Computer with:
 Wired Ethernet connection to the Network
 Ethernet cable(s)
y ZXP Series 9 Printer with the wireless option installed
Conguration
Step 1. Connect the printer to your wired network, and turn the power on.
Step 2. Retrieve the IP address of the printer—from the operator control panel (OCP), select
Info and scroll to the Network Info page (see “Info Menu” on page 48).
Step 3. Start your web browser.
Step 4. In the browser address bar, enter the IP address of the printer—the printer
conguration page will open.