Zebra ZXP Series - Page 37

P1086707-002 ZXP Series 9 Card Printer User Guide 25
Installation and Setup
Replacing the Laminate
Step 9. Rotate the core to adjust the laminate overhang. Stop when the end of the laminate
is just beyond the lip of the cassette, as shown below.
Important • Check for laminate overhang any time the locking lever is pressed or the
cassette is removed.
0 - 0.5 mm
0 - 1/32"
0 - 0.5 mm
0 - 1/32"