124 CM4003-001_v01
CLEANING THE APPLIANCE
1
Unplug the machine.
2
Allow the machine to cool.
3
Wipe the machine casing with a damp cloth or sponge.
The cloth attached to the machine
accessories can be used for cleaning its
external surfaces.
CLEANING THE MILK HOSE AND THE MILK
FROTHING REGULATOR
In order to clean the milk hose, follow the directions given
in the “RINSING THE APPLIANCE” SECTION. The water
owing through the internal pipes will be sucked through
the milk hose.
1
In order to clean the milk frothing regulator, take it out
of the appliance.
2
Rinse the regulator under running water.
3
Dry the cleaned element before tting it in the
appliance.
CLEANING THE COFFEE DISPENSING UNIT
NOZZLE
1
In order to clean the coffee dispensing unit nozzle,
slide the nozzle until you feel resistance, and then pull
rmly downwards.
2
Wash the coffee dispensing unit nozzle under running
water and put it back in its casing.
CLEANING THE BREW GROUP AND THE
COFFEE DELIVERING PIPE
Allow the machine to cool before cleaning the
brew group.
1
Unlock and open the service door.
2
Press the two release buttons located on the brew
group and remove the group.
3
Wash the brew group under running water and
thoroughly clean the inside of the machine.
The inside of the machine can be cleaned
using damp cloth after removing the brew
group and the drip tray.
4
Dry the cleaned element before tting it in the
appliance.
To Next Page
Loading...
Need help?
General
