Zelmer 13Z015 - User Manual

Questions and Answers

J
Justin SteeleAug 16, 2025
Why is coffee flowing out from the back of my Zelmer 13Z015 Coffee Maker filter handle?
- L
  lisa94Aug 16, 2025
  Coffee may leak from the back of the filter handle for several reasons. First, ensure the filter handle is correctly placed in the brew head and tightened securely. Also, coffee grains on the filter handle's edge or a dirty brew head can cause this issue. Clean the filter handle's upper edge and wipe the brew head. In case the brew head is damaged, contact an authorized service center.
C
Caitlin KiddAug 19, 2025
What to do if my Zelmer 13Z015 Coffee Maker espresso is without the characteristic foam?
- J
  Jeremy DavisAug 19, 2025
  If your espresso lacks foam, it could be due to several reasons related to the coffee itself. Ensure you are using fresh coffee, stored in an airtight container after opening. Also, make sure that the coffee is compressed harder. Try using properly ground coffee or consider changing your coffee brand.
E
erin31Aug 22, 2025
Why is coffee not flowing out of my Zelmer 13Z015 Coffee Maker?
- J
  Judy BaileyAug 22, 2025
  If coffee isn't flowing, first check if the water tank is filled and properly installed. Ensure the control is set to the correct position. The filter on the brew head may be blocked, and the sieve in the filter may be blocked. Empty the sieve in the filter and rinse it in running water. Wipe the brew head with a cloth.
J
Joseph KerrAug 26, 2025
How to fix a loose handle during brewing with my Zelmer Coffee Maker?
- H
  hopkinsamyAug 26, 2025
  A loose handle during brewing can occur if the coffee is compressed too much or is too finely ground; in this case compress the coffee more gently and change your coffee to a more coarsely ground. Also, make sure that the filter handle is properly placed in the brew head and is maximally tightened. Clean the upper edge of the filter handle from coffee and wipe the brew head with a wet cloth. If the brew head is dirty, wipe it with a wet cloth. If the brew head is damaged, contact an authorized service center.
M
Michael MelendezAug 28, 2025
Why is my Zelmer 13Z015 Coffee Maker pouring coffee in drops?
- C
  Christopher JordanAug 28, 2025
  If coffee is pouring in drops, it might be because the coffee is too finely ground or too compressed. If you use extremely fine ground coffee do not compress it too much. The machine may also be blocked by calcareous residues.
K
Kayla OlsonAug 30, 2025
Why is my Zelmer Coffee Maker not producing enough foamed milk?
- M
  mathewtorresAug 31, 2025
  Insufficient foamed milk can result from several factors. Ensure the milk is fresh and properly cooled before use. For optimal foaming, use the stainless steel pot provided with the machine, cooling and rinsing it with cold water beforehand. Also, check that the steam nozzle is clean and that the milk is not boiled. Try to use some fresh, cool milk.
M
Matthew McdowellSep 3, 2025
Why is no steam coming out of the nozzle of my Zelmer 13Z015?
- R
  Rachel GrossSep 3, 2025
  If no steam is coming out of the nozzle, it is likely that the steam nozzle is blocked. Clean and rinse the steam nozzle.
A
Anna ClarkSep 6, 2025
What to do if coffee flows out from the back of the filter handle of my Zelmer Coffee Maker?
- J
  Jessica GreeneSep 6, 2025
  If coffee flows out from the back of the filter handle of your Zelmer Coffee Maker, ensure that the filter handle is properly placed in the brew head and is maximally tightened. Also, clean the upper edge of the filter handle from coffee and wipe the brew head clean. If the brew head is dirty, wipe it with a wet cloth. If the brew head is damaged, contact an authorized service center.
C
Casey MorrisonSep 9, 2025
What to do if the handle is loose during the brewing process of my Zelmer Coffee Maker?
- F
  foleyannSep 9, 2025
  If the handle is loose during the brewing process of your Zelmer Coffee Maker, compress the coffee more gently. Change your coffee to a more coarsely ground. Ensure that the filter handle is properly placed in the brew head and is maximally tightened. Also, clean the upper edge of the filter handle from coffee and wipe the brew head clean. If the brew head is dirty, wipe it with a wet cloth. If the brew head is damaged, contact an authorized service center.
K
Kenneth ShawSep 12, 2025
Why is my Zelmer Coffee Maker espresso without the characteristic foam?
- J
  Joshua EdwardsSep 12, 2025
  If your Zelmer Coffee Maker espresso is without the characteristic foam, use fresh coffee and store it in an airtight container after opening. Compress the coffee harder. Use properly ground coffee or change your coffee brand.