To Next PageTo Next PageWhy does coffee run out around the edge of the filter holder on my Zelmer 13Z014?
If the coffee runs out around the edge of the filter holder of your Zelmer Coffee Maker, make sure the filter holder is properly inserted and tightened into the brew head. Also, clean any coffee particles from the filter rim and wipe the brew head with a damp cloth. If the brew head or its rubber seal is damaged, contact an authorized service center.
What to do if Zelmer 13Z014 Coffee Maker does not run coffee through?
If your Zelmer Coffee Maker isn't producing coffee, first, ensure the water tank is filled and properly installed. Check that the regulator knob is in the correct position. If the filter on the brew head or the coffee filter is blocked, empty the filter and rinse it under running water, and wipe the brew head with a cloth.
Why is my Zelmer Coffee Maker pump making too much noise?
If the pump of your Zelmer Coffee Maker is making too much noise, ensure that the water tank is filled with water and properly inserted.
How to fix espresso without foam from Zelmer 13Z014?
If your Zelmer Coffee Maker's espresso lacks characteristic foam, use fresh coffee and store it in a tight container after opening. Also, tamp the coffee more firmly, use properly ground coffee or change the coffee brand. Ensure there is enough coffee in the filter.
Why does coffee filter out in drops from my Zelmer Coffee Maker?
If the coffee filters out in drops from your Zelmer Coffee Maker, it might be because the coffee is ground too finely or tamped too firmly. If you use very finely ground coffee, do not tamp it too firmly. The appliance may also be blocked with scale build-up.
What causes the holder to loosen during brewing in my Zelmer Coffee Maker?
If the holder loosens during brewing with your Zelmer Coffee Maker, tamp the ground coffee less firmly or change to coarser coffee. Ensure the coffee holder is placed correctly and tightened in the brew head. If the brew head is damaged or the rubber seal of the brew head is damaged or worn out, contact an authorized service center.
How to fix too cold coffee from Zelmer 13Z014 Coffee Maker?
If your coffee is too cold when using your Zelmer Coffee Maker, pre-heat the cups, filters, and holder before brewing. When making cappuccino or latte, check if the milk is properly heated during frothing, but ensure that the milk does not boil.
Why am I not getting enough frothed milk from my Zelmer 13Z014 Coffee Maker?
If you're not getting enough frothed milk from your Zelmer Coffee Maker, check if the milk is fresh and properly cooled before use. For best results, use the stainless steel jug provided and cool it down or rinse with cold water if possible. Ensure that milk has not been boiled. Try to use fresh, cooled milk.
Why does my Zelmer 13Z014 espresso have a burnt taste?
If the espresso from your Zelmer Coffee Maker has a burnt taste, try other coffee brands. If the appliance was not rinsed after descaling, rinse it with a tank full of water and allow the tank to empty completely before brewing the next coffee.
How to fix uneven coffee distribution from Zelmer 13Z014?
If you experience uneven distribution of coffee into cups with your Zelmer Coffee Maker, check if the coffee is evenly tamped and if anything obstructs the outlets in the head for fixing the filter. If there is a damaged partition in the filter holder, contact an authorized service center.
General| Brand | Zelmer |
|---|---|
| Model | 13Z014 |
| Category | Coffee Maker |
| Language | English |
Removable water tank for easy filling.
Button to select hot water or steam function.
Wand for frothing milk and dispensing steam.
Rubber attachment for frothing milk effectively.
Instructions for brewing espresso coffee.
Instructions for using the steam function.
Instructions for dispensing hot water.
