EasyManuals Logo

ZEN FLOAT TENT User Manual

ZEN FLOAT TENT
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
RISK OF ELECTRICAL SHOCK
Plug Install the Float Tent at least three feet from all electrical
outlets and metal surfaces. Do not allow any electric appliance
within three feet of the Float Tent, and never introduce electric
appliances into the water, as this may result in serious bodily
injury or death.
7. FILL TANK WITH EPSOM SALT
Install inline filter to the hose you are using to fill your tent.
p
NOTE : To make sure no carbon from your filter enters your tank, run about 5
gallons of water through the filter into a drain, or until water runs clear.
This part takes time. Don’t rush it, just enjoy the process.
After adding 2 to 3 inches (5 to 7.5 cm) of water start smoothing out creases on the tub
floor. Once smooth, continue to fill the tank with 5 inches (13cm) of water. Add 100 lbs
(45 kg) of salt at a time, mixing in fully as you go.
NOTE: We provide 850 lbs (385 kg) of salt per pallet, you won’t use it all to fill
your tank. Only 800 lbs (363 kg).
14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZEN FLOAT TENT and is the answer not in the manual?

ZEN FLOAT TENT Specifications

General IconGeneral
BrandZEN
ModelFLOAT TENT
CategoryHot Tub
LanguageEnglish