Zendure Satellite Monitor CT User Manual

2
2. Specications
3. Safety Instructions
Satellite Monitor CT is an IoT powered electricity meter. It allows you to
simultaneously monitor the consumption of any household appliances,
circuits and ofce equipment in single-phase electrical systems.
It is perfect for monitoring household consumption, as well as tracking how
much energy your solar panels are producing and controlling SolarFlow and
AIO output to household appliances.
Zendure Satellite Monitor CT does not support a parallel
feed conguration or comprehensive three-phase monitoring, however if
your household uses three-phrase electricity, it can monitor one phase in
that system.
Name Satellite Monitor CT
Model ZDSMCT
Weight ≈ 181g
Dimensions 140 x 35 x 77mm
Rated System Voltage 100 ～ 240VAC ±10%
Frequency 50/60Hz
Consumption < 1.1W
Max Measurement per Channel 150A
Protection Level IP44
Operating Temperature -20 ～ 70℃
Storage Temperature -40 ～ 85℃
Operating Humidity (RH) 5 ～ 95%
Max Operating Altitude 3000 M
Wireless Type Bluetooth, Wi-Fi
1. The product should be installed by a qualied person
(electrician).
2. Please check whether Satellite Monitor CT is damaged, cracked,
or cables are damaged before operating. If so, please stop
using the product immediately and contact Zendure support.
3. Do not attempt to replace the internal components of the
equipment by any unauthorized personnel.
4. Please install the product according to the user manual to
avoid injury or damage to the product.
EN

Zendure Satellite Monitor CT Specifications

General

Brand	Zendure
Model	Satellite Monitor CT
Category	Power Supply
Language	English