ZENEC Z-E3726 Installation Manual

3
1
2.a
2.b
3
REMOVAL WORK AND PREPARATION:
1. Remove both storage compartments in
accordance with the manufacturer‘s information.
INSTALLATION:
2.a Cut off the left and right plastic holders for the
storage compartments as flush as possible.
3. Remove the two original Torx screws at the top
(T25).
2.b Use a suitable saw to do this, and then a file to
remove any protrusions still present.

ZENEC Z-E3726 Specifications

General

Resolution	800 x 480 pixels
Navigation System	Yes
Bluetooth	Yes
SD Card Slot	Yes
RDS Tuner	Yes
Steering Wheel Control Compatibility	Yes
Apple CarPlay	Yes
Android Auto	Yes
Radio	Yes
Video Playback	Yes
Audio Playback	Yes
Touchscreen	Yes
Rear View Camera Input	Yes
USB Ports	2