Zenitel VINGTOR STENTOFON ITSV-1 - User Manual

Video Entry Kit
Quick Start Guide
Included in the Kit
 ITSV-1 Video Desk Master Intercom
 ITSV-1 mounting brackets
 TCIV-3 Video Door Intercom
 Station to back-box sealing gasket
 TA-1 Surface Mount Back-box
 Screws, grommets and plugs
 Locating Template
 Quick Start Guide
Required - Not Included in the Kit
 Ethernet Switch
 CAT6 or 7 Ethernet cabling (lengths determined by site)
 Back-box mounting screws appropriate to substrate
(max diameter 5/16”)
Tools Needed
 Drill
 Drill bit (size depends on screws used for mounting)
 Tape measure
 T-25 Torx driver for station to back-box mounting
 Masking tape
 Marking pen
 Miscellaneous tools pliers, screw drivers, cutters, etc.

Zenitel VINGTOR STENTOFON ITSV-1 Specifications