Need help?Do you have a question about the Zenitel VINGTOR STENTOFON ECP-AA1 and is the answer not in the manual?
Details the purpose and content of the ECP-AA1 intercom technical manual.
Identifies the ECP-AA1 intercom by item number and name.
Records revisions, dates, authors, and status of the technical manual.
Lists other technical manuals relevant to the ECP-AA1 intercom.
Describes the Ethernet and I/O connectors, including pin configurations for the ECP-AA1.
Explains that the ECP-AA1 is powered via Power over Ethernet (PoE).
Details connecting a clean contact to the ECP-AA1 for emergency calls.
Explains connecting a trigger input to the CCTV system from the ECP-AA1.
Guides through initial setup, IP address configuration, and web interface login.
Covers adjustments for speaker volume, microphone sensitivity, and noise reduction.
Details configuration of Input/Output pins for various functions.
Configures relay settings for the CCTV interface using Relay 1.
Configures relay settings for Output 5, including outgoing ringing and idle states.
Configures relay settings for Output 6, specifically for outgoing call and idle states.
Defines how the call button and emergency break input function as call buttons.
Configures sequential calling to multiple numbers until a call is accepted.
Details the necessary SIP settings for the ECP-AA1 to register to a SIP server.
General| Brand | Zenitel |
|---|---|
| Model | VINGTOR STENTOFON ECP-AA1 |
| Category | Intercom System |
| Language | English |
To Next Page