Need help?Do you have a question about the Zenitel Vingtor Stentofon ITSV-3 and is the answer not in the manual?
Crucial warnings regarding power cycling during boot-up/firmware upgrades and using approved power adapters.
Details the 7" touchscreen, camera, ports, Wi-Fi, Bluetooth, and Android OS features.
Step-by-step guide for mounting the phone on a wall using the provided wall mount bracket.
Instructions on how to deploy and adjust the integrated phone stand for desktop use.
Guide to connecting the handset, network cable, and power adapter for initial setup.
Explains the purpose and usage of the phone's physical keys and status indicator.
Detailed steps for configuring accounts, network settings, and widgets using the device's touch interface.
Comprehensive guide to accessing and configuring the ITSV-3 via a web browser, including account registration.
Instructions for setting up the ITSV-3 account for integration with the ICX-AlphaCom system.
Guide to configuring audio codecs for optimal performance with ICX-AlphaCom.
Steps for configuring video streaming from TCIV+ cameras to the ITSV-3 via ICX-AlphaCom.
Instructions for setting up the ITSV-3 account for integration with the IC-EDGE controller.
Steps for configuring video streaming from TCIV+ cameras to the ITSV-3 via IC-EDGE.
General| Communication Type | IP |
|---|---|
| Audio Quality | HD Voice |
| Ethernet | 10/100 Mbps |
| Ingress Protection | IP66 |
| Microphone Sensitivity | -38 dB |
| Speaker Impedance | 8 Ohm |
| Type | IP Intercom |
| Power Supply | 24V DC |
| Mounting Type | Wall Mount |
| Audio Codec | G.711, G.722 |
| Protocols | SIP, RTP |
| Power | PoE IEEE 802.3af |
| Power Consumption | 5W |
| Frequency Response | 200 Hz to 7 kHz |
| Material | Aluminum |
To Next Page