Zenith 12 - Changing the Batteries

Changing the Batteries
The Meter is powered
by two Mallory D386
cells which should be
changed every twelve
months.
To remove- Place coin
in slot of Battery Cover
[19] and turn anti¬
clockwise until slot is
horizontal. Remove
cover and old batteries.
Fit two new batteries
both with outwards.
Replace battery cover
with slot horizontal
locating the two cover
arms in the camera
body slots. With a coin
edge push inwards and
turn to lock in vertical
position.
Use a clean linen cloth
when handling batteries
- the grease from bare
fingers can adversely
affect the electrical
contacts.
25