Zenith ZLS3584W - Defrosting; Changing the Illumination Lamp

EN
16
Defrosting
The larder frdge defrosts
automatcally. The defrostng water
runs to the dran tube va a collecton
channel and s evaporated n a specal
contaner (1)at the back of the
applance (see dagram).
Durng defrostng water droplets
may format the back of the larder
frdge where concealed evaporator s
located. Some droplets may reman on
the lner and refreeze when defrostng
s completed.
Do not use ponted or sharp edged
objects such as knves, forks to remove
the droplets whch have refreezed.
If at any tme the defrost water does
not dran from the collecton channel,
check to ensure that no food partcles
have blocked the dran tube.
The dran tube can be cleared by
pushng the specal plastc plunger
provded downthe dran tube.
Changing the illumination
lamp
To change the Bulb/LED used for
illumination of your refrigerator, call
your AuthorisedService.
The lamp(s) used in this appliance
is not suitable for household room
illumination. The intended purpose
of this lamp is to assist the user to
place foodstuffs in the refrigerator/
freezer in a safe and comfortable
way.The lamps used in this appliance
have to withstand extreme physical
conditions such as temperatures
below -20 °C.
(only chest and upright freezer)
This product is equipped with a
lighting source of the "G" energy class.
The lighting source in this product
shall only be replaced by professional
repairers.